Pedal Setup
Connect, calibrate and test your USB pedals — all in one place.
Plug in your USB pedals and press the brake to wake the browser Gamepad API.
Release the pedal, then press to your working maximum, then save. Advanced options are further down.
Press the brake pedal and pick the axis that moves.
Lift your foot completely off the brake, then capture the resting value.
Verify your pedal reaches 0% and 100% with the calibration applied.
Save a calibration in Step 2 to see calibrated 0–100% pressure here.
Throttle is optional. Configure it below if you want Combined Reaction.
Only needed for Combined Reaction. Your brake configuration above stays untouched — the throttle may even live on a different USB device.
Start detection, then press the throttle pedal fully and release it.
No axis data. Press a pedal on the selected device.
Optional. Only needed for the Direction and Avoidance reaction drills — your brake calibration above is unaffected.
Connect your wheel and move it — detected axes appear here.
Turn on if left and right are swapped.
A reaction counts as LEFT at -0.100 and RIGHT at 0.100.